HTJ Works Hide & Seek Dual OD Centaur/TS10 - tgt11 - tgt11
Hem » Pedaler » Produkt

HTJ Works Hide & Seek Dual OD Centaur/TS10

4795 :-
Slut i lager

Ange din e-postadress för att bevaka denna artikel. Du blir meddelad när artikeln åter är i lager.

Lagerstatus: Ej i lager
FRI FRAKT FRI FRAKT PÅ DENNA PRODUKT
SNABB SERVICE
Vi skickar samma dag om ordern är lagd innan kl 12:00 CET

14 DAGAR FULL RETURRÄTT
Byt eller pengarna tillbaka

HIDE&SEEK is a very convenient item with two pedal functions.

There are two models, Bright Horse and TSH-10, inside.
The left side is equipped with a KLON motif bright hose, and the right side is equipped with a Japanese TS10 motif.

The pedals are designed to connect two in series, but you can switch between the front and rear pedals with the switch on the front.
Each of the two pedals has a buffer on/off.

With this function, you can have a wide variety of sound variations even with two pedals.
For example, set the buffer to Bright Hprse and use only TSH10.You can choose to place the buffer in front or behind the TSH10 by simply flipping the front/rear switch.This has very surprising effects.

On the left side of the front is a switch that toggles the Bright Horse clipping diode.Germanium on the top, silicon diode on the bottom.
The effect appears only when the GAIN is increased.
Silicon diodes have a slight effect but provide a finer tone.

There is a switch inside to select between 9V and 18V drive for TSH-10.Another switch is Bright Horse's buffer tone toggle. Pass capacitors are available in 4.7µ or 1µ.(The initial period is normal. Normal is 4.7μ.)

It has a chic design that fits smartly on various pedal boards.
Of course, you can have a lot of fun with this pedal alone.

It is highly recommended not only for blues players, but also for artists of various genres.

〈IN/OUT〉
・DC JACK
The connection part of the DC adapter. Be sure to use a DC9V power supply as it is stepped up internally.

〈Control〉
【Bright Horse Side】
GAIN/TREBLE/VOL
Ge/Si Switch
Select buffer tone(On PCB)
【TSH-10 Side】
DRIVE/TONE/LEVEL
9V/18V Select Switch(Normal is 9V)
【Buffer On/Off Selec】
Each setting can be made with two slide switches on the inner bottom.
At the time of shipment, the bright hose is Buffer and the TSH-10 is through.(Both switches are Buffer on the left and Through on the right.)

This pedal is a model that faithfully combines the circuits of the two pedals. Balanced design from the power circuit.
See the Bright Horse and TSH-10 pages for descriptions of each pedal.

〈Basic specifications〉
・Size 1590BB 119.5×94×34mm
(4.705"L X 3.701"W X 1.339"H)
・9VDC Adapter
・No built-in battery
・White LED Lamp
・Product parts and specifications are subject to change without notice.

Läs mer


We've selected shipping to

SVERIGE

[Change country below]